Â鶹´«Ã½

Skip to main content
School of Engineering
Search for something
Search...

Staff Profile

Dr Dehong Huo

Reader in Precision Engineering

  • Telephone: 0191 208 6230
  • Address: School of Engineering
    3.24, Stephenson Building
    Â鶹´«Ã½
    Â鶹´«Ã½
    NE1 7RU
Background

Introduction

Dr Dehong Huo joined School of Mechanical and Systems Engineering of Â鶹´«Ã½ in 2011 (became part of School of Engineering from 1st August 2017). Dr Huo has been researching in the area of ultra-precision machine development, vibration-assisted machining, and micro-machining particularly micro-milling process. More recently his work in precision manufacturing is focused on developing micro machining processes and hybrid machining processes for hard and brittle materials. His research has been supported by EPSRC, Innovate UK, and industry.

Area of expertise: Precision Manufacturing, Micro Machining, Precision Machine Design

Qualifications 

PhD in Precision Manufacturing (Harbin Institute of Technology)

MEng in Mechanical Engineering (Harbin Institute of Technology)

PgCert in Higher Education (Middlesex University)

Memberships

FHEA, Member of Euspen

Research
Research Interests
  • Atomic and multi-scale simulation of cutting processes and microstructure material properties.
  • Experimental investigation of micro cutting processes
  • Hybrid machining processes
  • Ultra-precision micro machine design  
Funding
  • 2015-2018, EPSRC (EP/M020657/1) ‘‘, Principal investigator
  • 2013-2014, EPSRC (EP/J02161X/1) Principal investigator
  • 2014, GE Oil & Gas, To identify the failure modes of the composite pipes under radially distributed compressive load
Research Supervision
  • Mr Xiangyu Teng
  • Mr Zi Jie Choong
  • Mr Amin Dadgari
  • Mr Babis  Tzivelekis
  • Mr Lu Zheng
  • Mr Peyman Hesamikojidi
  • Mr Guoyu Fu
  • Dr Wanqun Chen

 

Teaching

Current teaching:

  • ENG1007 Mechanics I
  • MEC3030 Digital Manufacturing and System
  • MEC3098 Mechanical Engineering Project
  • MEC8095 MSc Project: Mechanical and Systems Engineering


Previous teaching:

  • MEC1011 Mechanics
  • MEC2009 Mechanics II
  • MEC2007 Design and Manufacturing II
  • MEC3018 Design for Industry
  • MEC8052 Manufacturing, Materials and Processes

at Â鶹´«Ã½ Singapore campus:

  • MEC2103 Concurrent Design and Manufacture 
  • MEC2105 Control System Technology
  • MEC3103 Product Design Engineering
  • MEC3105 Mechatronic Systems
  • MEC3106 Operations and Production Management


 

 

Publications

  • Articles

    • Le B, Fu G, Khaliq J, Huo D, Shyha I. . Journal of Manufacturing Processes 2023, 99, 781-793.
    • Zheng L, Fang M, Chen W, Huo D, Li H. . Langmuir 2023, 39(21), 7396-7407.
    • Satpute V, Huo D, Hedley J, Elgendy M. . International Journal of Advanced Manufacturing Technology 2023, 126, 1035-1053.
    • Gong Z, Huo D, Niu Z, Chen W, Cheng K. . Journal of Manufacturing Processes 2022, 80, 458-468.
    • Fu G, Huo D, Shyha I, Sun F, Gao Q. . International Journal of Advanced Manufacturing Technology 2022, 119, 2341-2353.
    • Pervaiz S, Kannan S, Anwar S, Huo D. . International Journal of Advanced Manufacturing Technology 2022, 118, 3801-3818.
    • Gong Z, Huo D, Niu Z, Chen W, Shyha I. . Precision Engineering 2022, 75, 12-23.
    • Fu G, Wang J, Sun F, Sun F, Shyha I, Fang C, Huo D. . Journal of Manufacturing Processes 2022, 77, 770-782.
    • Fu G, Sun F, Sun F, Huo D, Shyha I, Fang C, Gao Q. . Composites Part B: Engineering 2022, 230, 109545.
    • Zheng G, Huo D, Niu Z, Chen W, Cheng K. . Nanotechnology and Precision Engineering 2022, 5, 023005.
    • Gong Z, Huo D, Niu Z, Chen W, Cheng K. . Mechanical Systems and Signal Processing 2022, 173, 109063.
    • Shyha I, Huo D, Hesamikojidi P, Eldessouky H, El-Sayed MA. . The International Journal of Advanced Manufacturing Technology 2021, 112, 1101-1113.
    • Gou N, Cheng K, Huo D. . Machines 2021, 9(5), 85.
    • Chen J, Huo D, Yeddu HK. . Materials Research Express 2021, 8(10), 106508.
    • Le B, Kernin A, Khaliq J, Fu G, Huo D, Bilotti E, Zhang H, Shyha I. . Journal of Manufacturing Processes 2021, 70, 307-320.
    • Fang C, You W, Huo D. . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2021, 236(4), 732-747.
    • Fu G, Sun F, Huo D, Shyha I, Sun F, Fang C. . Journal of Manufacturing Processes 2021, 71, 134-146.
    • Shakoori N, Fu G, Le B, Khaliq J, Jiang L, Huo D, Shyha I. . International Journal of Advanced Manufacturing Technology 2021, 113, 2003-2015.
    • Kannan S, Pervaiz S, Klassen RJ, Huo D, Haghshenas M. . Journal of Manufacturing Science and Engineering, Transactions of the ASME 2021, 143(3), 031007.
    • Wang Y, Kang R, Dong Z, Wang X, Huo D, Zhang X. . Journal of Manufacturing Science and Engineering, Transactions of the ASME 2021, 143(4), 041012.
    • Fang C, Huo D, Huang X. . International Journal of Advanced Manufacturing Technology 2021, 114, 949-967.
    • Zheng L, Chen W, Huo D. . International Journal of Advanced Manufacturing Technology 2020, 108, 1631-1651.
    • Sun F, Huo D, Fu G, Teng X, Kannan S, Zhang H. . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2020, 234(12), 1473-1485.
    • Zheng L, Chen W, Huo D. . Micromachines 2020, 11(4), 380.
    • Tzivelekis C, Sgardelis P, Waldron K, Whalley R, Huo D, Dalgarno K. . PLoS ONE 2020, 15(10), e0240237.
    • Fu G, Huo D, Shyha I, Pancholi K, Alzahrani B. . International Journal of Advanced Manufacturing Technology 2020, 107, 3169-3183.
    • Pervaiz S, Kannan S, Huo D, Mamidala R. . International Journal of Advanced Manufacturing Technology 2020, 111(7-8), 2127-2153.
    • Le B, Khaliq J, Huo D, Teng X, Shyha I. . Journal of Manufacturing Science and Engineering, Transactions of the ASME 2020, 142(10), 100802.
    • Choong ZJ, Huo D, Ponon N, Savidis R, Degenaar P, O'Neill A. . Materials Science and Engineering C 2020, 110, 110737.
    • Pancholi K, Robertson P, Okpozo P, Beattie N, Huo D. . Journal of Physics: Energy 2019, 1(1), 015007.
    • Gupta R, Huo D, White M, Jha V, Stenning GBG, Pancholi K. . Composites Communications 2019, 16, 67-78.
    • Chen W, Sun Y, Huo D, Teng X. . Chinese Journal of Mechanical Engineering (English Edition) 2019, 32(2).
    • Chen W, Zheng L, Xie W, Yang K, Huo D. . Journal of Materials Processing Technology 2019, 266, 339-350.
    • Choong ZJ, Huo D, Degenaar P, O'Neill A. . Journal of Manufacturing Processes 2019, 38, 93-103.
    • Gao Q, Lu L, Zhang R, Song L, Huo D, Wang G. . International Journal of Advanced Manufacturing Technology 2019, 102, 3813-3823.
    • Chen W, Zheng L, Teng X, Yang K, Huo D. . International Journal of Advanced Manufacturing Technology 2019, 105(11), 4539-4549.
    • Zheng L, Chen W, Huo D. . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019, 233(12), 4112-4119.
    • Gupta R, Pancholi K, De Sa R, Murray D, Huo D, Droubi G, White M, Njuguna J. . JOM 2019, 71, 3119-3128.
    • Choong ZJ, Huo D, Degenaar P, O'Neill A. . Applied Surface Science 2019, 486, 166-178.
    • Chen W, Tong Z, Huo D, Zhong W, Jiang X. . International Journal of Advanced Manufacturing Technology 2019, 104, 2317-2328.
    • Chen W, Zheng L, Huo D, Chen Y. . Journal of Micromechanics and Microengineering 2018, 28(2), 025006.
    • Chen W, Huo D, Shi Y, Hale J. . The International Journal of Advanced Manufacturing Technology 2018, 97(5-8), 2033-2049.
    • Zheng L, Chen W, Pozzi M, Teng X, Huo D. . Precision Engineering 2018, 55, 179-188.
    • Lin C, Shen Z, Yu J, Li P, Huo D. . Micromachines 2018, 9(10), 498.
    • Chen W, Huo D, Hale J, Ding H. . International Journal of Mechanical Sciences 2018, 136, 169-178.
    • Dadgari A, Huo D, Swailes D. . Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering 2018, 1(4), 218-225.
    • Teng X, Huo D, Chen W, Wong E, Zheng L, Shyha I. . Journal of Manufacturing Processes 2018, 32, 116-126.
    • Gariani S, Shyha I, Inam F, Huo D. . International Journal of Advanced Manufacturing Technology 2018, 95(5-8), 2795-2809.
    • Teng X, Chen W, Huo D, Shyha I, Lin C. . Composite Structures 2018, 203, 636-647.
    • Chen W, Teng X, Zheng L, Xie W, Huo D. . Manufacturing Letters 2018, 16, 6-9.
    • Shyha I, Gariani S, El-Sayed M, Huo D. . Metals 2018, 8(3), 185.
    • Teng X, Huo D, Shyha I, Chen W, Wong E. . International Journal of Advanced Manufacturing Technology 2018, 96(5-8), 2127-2140.
    • Chen W, Xie W, Huo D, Yang K. . International Journal of Mechanical Sciences 2018, 144, 146-157.
    • Chen W, Lu L, Xie W, Huo D, Yang K. . Journal of Manufacturing Science and Engineering 2018, 140(11), 111014.
    • Dadgari A, Huo D, Swailes D. . Solid State Phenomena 2017, 261, 69-76.
    • Zhang Y, Wang Y, Zhao Y, Wang J, Lu J, Huo D. . Gaojishu Tongxin/Chinese High Technology Letters 2017, 27(3), 285-293.
    • Chen W, Huo D, Teng X, Sun Y. . Procedia CIRP 2017, 58, 364-369.
    • Huo D, Chen W, Teng X, Lin C, Yang K. . Micromachines 2017, 8(6), 1-10.
    • Dadgari A, Huo D, Swailes D. . International Journal of Robotics and Mechatronics 2017, 4(1), 8-15.
    • Gariani S, Shyha I, El-Sayed MA, Huo D. . Journal of Engineering Technology 2017, 6(2), 414-423.
    • Gariani S, Shyha I, Inam F, Huo D. . Applied Sciences 2017, 7(6), 560.
    • Zhao Y, Li T, Zhang Y, Huo D. . Current Nanoscience 2017, 13(1), 48-54.
    • Cai Z, Lin C, Huo D, Zhu C. . Journal of Mechanical Science and Technology 2017, 31(2), 911-921.
    • Chen W, Teng X, Huo D, Wang Q. . International Journal of Advanced Manufacturing Technology 2017, 93(9-12), 3005-3016.
    • Zhao Y, Wei X, Zhang Y, Wang J, Huo D. . Journal of Computational and Theoretical Nanoscience 2016, 13(1), 752-760.
    • Teng X, Huo D, Wong E, Meenashisundaram G, Guptab M. . International Journal of Advanced Manufacturing Technology 2016, 87(5), 2165–2178.
    • Zhao Y, Wei X, Zhang Y, Wu F, Huo D. . Key Engineering Materials 2016, 667, 88-94.
    • Chen W, Huo D, Xie W, Teng X, Zhang J. . Chinese Journal of Mechanical Engineering 2016, 29(6), 1090-1095.
    • Choong Z, Huo D, Degenaar P, O'Neill A. . Proceedings of the Institution of Mechanical Engineering. Part B: Journal of Engineering Manufacture 2016, 230(9), 1756-1764.
    • Huo D, Choong Z, Shi Y, Hedley J, Zhao Y. . Journal of Micromechanics and Microengineering 2016, 26(9), 095005.
    • Zhao Y, Lu J, Zhang Y, Wu F, Huo D. . International Journal of Mechanical Sciences 2016, 106, 168-175.
    • Lim BY, Lau MWS, Wan S, Leong J, Lim A, Huo D, Goh KL. . International Journal of Mechanical Engineering Education 2016, 44(2), 97-112.
    • Zhao Y, Wei X, Zhang Y, Wang J, Huo D. . Journal of Non-Crystalline Solids 2016, 439, 21-29.
    • Huo DH, Lin C, Choong Z, Pancholi K, Degenaar P. . International Journal of Advanced Manufacturing Technology 2015, 81(5-8), 1319-1331.
    • Lin C, Ji J, Tao Y, Huo D, Cai L, Cheng K. . Transactions of Nanjing University of Aeronautics and Astronautics 2015, 31(5), 484-491.
    • Chen W, Lu L, Yang K, Huo D, Su H, Zhang Q. . International Journal of Advanced Manufacturing Technology 2015.
    • Chen W, Liang Y, Sun Y, Huo D, Lu L, Liu H. . International Journal of Advanced Manufacturing Technology 2014, 70(1-4), 429-438.
    • Huo D, Lin C, Dalgarno K. . International Journal of Advanced Manufacturing Technology 2014, 72(5-8), 943-953.
    • Chen W, Liang Y, Sun Y, Huo D, Su H, Zhang F. . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2014.
    • Zhao Y, Wei X, Zhang Y, Huo D. . Gaojishu Tongxin/Chinese High Technology Letters 2014, 24(11), 1176-1186.
    • Qiu H, Yue Y, Kubo A, Lin C, Cheng K, Huo D, Li D. . Modern Mechanical Engineering 2012, 2, 71-85.
    • Huo D, Cheng K. . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2010, 224(6), 995-1003.
    • Huo DH, Cheng K, Wardle F. . International Journal of Advanced Manufacturing Technology 2010, 47(9-12), 879-890.
    • Huo DH, Cheng K, Wardle F. . International Journal of Advanced Manufacturing Technology 2010, 47(9-12), 867-877.
    • Wardle F, Bond C, Wilson C, Cheng K, Huo D. . International Journal of Advanced Manufacturing Technology 2009, 47(9-12), 911-918.
    • Huo D, Cheng K, Wardle F. . International Journal of Machine Tool and Manufacture 2009, 50(4), 335-343.
    • Yang Y, Chen S, Huo D, Cheng K. . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2008, 222(C8), 1541-1546.
    • Huo D, Cheng K. . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2008, 222(1), 1-13.
    • Huo D, Liang Y, Cheng K. . Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science 2007, 221(2), 259-266.
    • Sun X, Chen S, Cheng K, Huo D, Chu W. . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2006, 220(7), 1217-1222.

  • Book Chapters

    • Le B, Shyha I, Huo D. . In: Shyha I; Huao D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.369-394.
    • Shyha I, Huo D, Davim JP. . In: Shyha I; Huo D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.1-13.
    • Teng X, Huo D, Shyha I. . In: Shyha I; Huo D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.219-252.
    • Teng X, Huo D. . In: Shyha I; Huo D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.159-181.
    • Chen W, Huo D. . In: Advanced Machining Processes: Innovative Modeling Techniques. Boca Raton, FL, USA: CRC Press, 2017, pp.107-140.
    • Mativenga PT, Aramcharoen A, Huo D. . In: Kai Cheng and Dehong Huo, ed. Micro-Cutting: Fundamentals and Applications. Chichester: John Wiley & Sons Ltd, 2013, pp.45-61.
    • Huo D, Cheng K. . In: Kai Cheng and Dehong Huo, ed. Micro-Cutting: Fundamentals and Applications. Chichester: John Wiley & Sons Ltd, 2013, pp.19-44.
    • Huo D, Cheng K. . In: Kai Cheng and Dehong Huo, ed. Micro-Cutting: Fundamentals and Applications. John Wiley & Sons Ltd, 2013, pp.155-183.
    • Huo D, Cheng K, Ding H. . In: Liu, X., Bai, Z., Shuang, Y., Zhou, C., Shao, J, ed. Advanced Materials and Process Technology. Zurich, Switzerland: Trans Tech Publications Ltd, 2012, pp.1699-1704.

  • Conference Proceedings (inc. Abstracts)

    • Gao Q, Lu L, Chen W, Wang G, Huo D. . In: European Society for Precision Engineering and Nanotechnology 18th International Conference and Exhibition (EUSPEN 2018). 2018, Venice: euspen.
    • Shyha I, Huo D, Le B, Fu G, Soliman E, Alzahrani B. . In: 16th International Conference on Manufacturing Research (Advances in Manufacturing Technology XXXII). 2018, University of Skövde, Sweden: IOS Press BV.
    • Huo D, Chen W, Teng X, Zheng L, Lin C. . In: European Society for Precision Engineering and Nanotechnology 18th International Conference and Exhibition (EUSPEN 2018). 2018, Venice: euspen.
    • Shyha I, Le B, Huo D, Fu G, Arrowsmith H, Ahmed A. . In: 16th International Conference on Manufacturing Research (Advances in Manufacturing Technology XXXII). 2018, University of Skövde, Sweden: IOS Press BV.
    • Zhao Y, Li T, Zhang Y, Wang J, Huo D. . In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
    • Naylor A, Huo D, Hackney PM, Perera N. . In: 23rd International Wood Machining Seminar. 2017, Warsaw, Poland.
    • Choong ZJ, Huo D, Degenaar P, O'Neill A. . In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
    • Teng X, Huo D, Wong WLE, Sankaranarayanan S, Gupta M. . In: TMS 2017. 2017, San Diego, USA: Springer.
    • Teng X, Huo D, Wong WLE, Sankaranarayanan S, Gupta M. . In: TMS 2017 146th Annual Meeting and Exhibition. 2017, San Diego, CA, USA: Springer International Publishing.
    • Chen W, Huo D, Hale J. . In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
    • Gupta R, Pancholi K, Prabhu R, Pancholi M, Huo D, Jha V, Latto J. . In: OCEANS 2017 - Aberdeen. 2017, Aberdeen, Scotland: Institute of Electrical and Electronics Engineers Inc.
    • Huo D, Chen W, Lin C, Zheng L, Hale J. . In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
    • Teng X, Huo D, Chen W. . In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
    • Choong ZJ, Huo D, Degenaar P, O'Neill A. . In: ASME 2016 11th International Manufacturing Science and Engineering Conference. 2016, Blacksburg, Virginia, USA: American Society of Mechanical Engineers.
    • Choong ZJ, Huo D, Degenaar P, O'neill A. . In: 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016). 2016, Nottingham, UK: EUSPEN.
    • Shi Y, Huo D, Zhao Y, Al-Shibaany ZYA, Hedley J. . In: 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. 2015, Leuven, Belgium: euspen.
    • Pancholi K, Jha V, Dodds N, Huo D, Latto J. . In: Proceedings of the ASME 2015 International Conference on Ocean, Offshore and Arctic Engineering - OMAE 2015. 2015, St John's, Newfoundland, Canada: American Society of Mechanical Engineers (ASME).
    • Teng X, Huo D, Wong WLE, Gupta M. . In: 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. 2015, Glasgow, UK: Institute of Electrical and Electronics Engineers Inc.
    • Al-Shibaany ZYA, Choong ZJ, Huo D, Hedley J, Hu ZX. . In: 2015 IEEE SENSORS. 2015, Busan, South Korea: IEEE.
    • Huo D, Zhao Y, Dalgarno K. . In: 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. 2014, Dubrovnik, Croatia: euspen.
    • Al-Shibaany ZYA, Hedley J, Huo DH, Hu ZX. . In: 27th International Conference on CADCAM, Robotics and Factories of the Future 2014 (CARs & FoF). 2014, London: Institute of Physics Publishing Ltd.
    • Zhang Y, Wang J, Zhao Y, Huo D. . In: 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing (ICAC 2014). 2014, Cranfield University, Bedford, UK: IEEE.
    • Zhao Y, Zhang Y, Huo D, Teng X, Shi Y. . In: ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing. 2014, Cranfield University, Bedford, UK: IEEE.
    • Lin C, Guo Q, Cheng K, Qiu H, Huo D. Modeling of Dynamic Cutting Force in High-Speed Dry Gear based on Multifactor Coupling. In: The 5th International Conference on Responsive Manufacturing - Green Manufacturing. 2010.
    • Huo D, Maropoulos PG, Cheng CH. The Framework of the Virtual Laser Tracker – A Systematic Approach to the Assessment of Error sources and Uncertainty in Laser Tracker Measurement. In: 6th International Conference on Digital Enterprise Technology. 2009, HongKong.
    • Dai W, Maropoulos P, Tang X, Huo D, Cai B. Quality Planning Based on Risk Assessment. In: 6th International Conference on Digital Enterprise Technology. 2009, Hong Kong.
    • Cheng CH, Huo D, Zhang X, Dai W, Maropoulos PG. Large Volume Metrology Process Model: Measurability Analysis with Integration of Metrology Classification Model and Feature-Based Selection Model. In: 6th International Conference on Digital Enterprise Technology. 2009, Hong Kong.
    • Cheng K, Huo D, Wardle F, Nor KM. Design of a 5-Axis Ultraprecision Micro Milling Machine (UltraMill) and its Key Enabling Technologies. In: The 9th International Conference of the European Society for Precision Engineering and Nanotechnology. 2009.
    • Lin C, Cheng K, Qiu H, Huo D, Sun X. A methodology for performance measurement and assessment of bench-top precision machine tools. In: 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. 2009, Uxbridge, UK.
    • Huo D, Cheng K. . In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN). 2007, Bremen, Germany: EUSPEN.
    • Nor KM, Huo D, Cheng K. A PC-Based Control System for Multiple-Axis Micro/Nano Machining: Control Architecture and Implementations. In: 8th International Conference and Exhibition on Laser Metrology Machine Tool, CMM & Robotic Performance (LAMDAMAP 2007). 2007, Cardiff, Wales.
    • Hussin ZM, Cheng K, Huo D. On-Line Modal Identification of a CNC Machining System Based on Surface Roughness Laser Scattering: Theoretical Perspectives. In: 2nd Virtual International Conference on Intelligent Production Machine and System (IPROMS 2006). 2006, Online: Elsevier Science.
    • Huo D, Cheng K. . In: Proceedings of 6th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2006). 2006, Vienna, Austria: EUSPEN.
    • Huo D, Cheng K. . In: 2nd International Conference on Multi-Material Micro Manufacture (4M2006). 2006, Grenoble, France: Elsevier.

  • Edited Book

    • Cheng K, Huo D, ed. . Wiley, 2013.

  • Editorials

    • Huo D, Cheng K. . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019, 233(12), 4079-4080.
    • Cheng K, Huo D. . Micro-Cutting: Fundamentals and Applications 2013, xv-xvii.

  • Review

    • Gao Q, Chen W, Lu L, Huo D, Cheng K. . Tribology International 2019, 135, 1-17.